High Pressure CO2 Coolant System with Minimum Quantity Lubrication Ability - CANCELLED

This exercise is now cancelled.

1927/371/MY/AMRC/18 High Pressure CO2 Coolant System with Minimum Quantity Lubrication Ability

The AMRC requires delivery, installation, testing and commissioning of a system to provide high pressure CO2 and MQL coolant to an existing machine, with the outcome of reducing tool wear and/or allowing for more aggressive/faster cuts.

The system should be externally connected and should be supplied with its own base. The system should allow the machine to alternate between traditional emulsion through tool coolant and through tool supply of CO2 with minimum intervention.

The Cooling System shall be fitted onto a Cincinnati H5-800MT Geminex 5-Axis which is currently undergoing an upgrade at the AMRC's nominated supplier, Machine Tool Technologies Limited ( MTT ) -at the address below:

MACHINE TOOL TECHNOLOGIES LIMITED

SUITE 1H RIBBLE COURT

1. MEAD WAY

BURNLEY

BB12 7NG

It is desired that the coolant system will be fitted during the upgrade at MTT's premises.

The successful Tenderer will be required to co-ordinate with MTT and all other interested stakeholders to ensure that all necessary arrangements are established for completion of the project in the following phases:

Phase One:

Delivery, installation and commissioning of the coolant system fitted to the Cincinnati H5-800MT Geminex 5-Axis.

On completion of commissioning, testing to be conducted to confirm the system is operating correctly.

Final acceptance by University.

Phase Two:

On final acceptance, the Tenderer shall decommission the equipment, any Rotary Union etc shall remain in place within the Cincinnati machine.

The Tenderer to remove and store at own premises and cost, pending re-commissioning at Phase Three of the project.

Phase Three:

In collaboration with MTT and the Purchase, co-ordinate the delivery of the coolant system at the Advanced Manufacturing Research Centre Delivery, Installation, Testing, Re-Commissioning at the Advanced Manufacturing Research Park, Catcliffe, Rotherham.

Final Acceptance by the Advanced Manufacturing Research Centre

The price submitted should take into account all costs incurred for full turnkey provision, at all at all phases of the project and shall include any transportation and storage costs that may be incurred.

Tender Process and Documentation:

This procurement is an EU open procedure carried out in accordance with the Regulations ( Public Contracts Regulations 2015).

The ITT can be downloaded by registering and expressing your interest on the University`s e-tendering system https://in-tendhost.co.uk/Sheffield

If you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed at https://in-tendhost.co.uk/Sheffield

Completed tenders must be returned through the same e-tendering system.

Closing date for receipt of tenders: 24th May 2018 at 12 noon (UK time).