COMPACT SWEEPER SWINGO 200+ PUSHED 2-BRUSH SYSTEM

Name: COMPACT SWEEPER SWINGO 200+ PUSHED 2-BRUSH SYSTEM
Creator: Chippenham Town Council
Published: 2026-02-09T14:59:40.000Z
License: https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/

Chippenham Town Council Published 9 Feb 2026 Find a Tender

key details

Status	active
Category (CPV)	34114000
Deadline	9 Mar 2026
Procedure	open
OCID	ocds-h6vhtk-064b5c

description

Chippenham Town Council invites companies to supply competitive quotes for the supply of the following:

A COMPACT SWEEPER SWINGO 200+ PUSHED 2-BRUSH SYSTEM

Specification

Engine
Euro6 - Common Rail
4 cylinder, displacement 2960 to 3000 cm³
60 kW to 65 kW @ 2300 to 2500 rpm

Max. torque 270 Nm @ 1350 rpm

Transmission

Full hydrostatic transmission with 2 drive modes (sweeping + transit) via rear axle with differential
Stepless and automatic load-dependent transmission control (automotive drive)

Axles

Hydraulic power steering
Selectable 4-wheel steering
Tyres 225/70 R15 to 225/80 R15

Mechanical/Coil spring suspension for front and rear axle inc damper and front anti-roll bar Cab

Cabin with two seats mounted on elastic rubber elements for low vibrations
Ergonomic high back driver's seat with mechanical or air stepless suspension adjustment, fully adjustable
Driver and passenger side sliding windows
Heater / ventilation with recirculating and fresh air with adjustable vents. Minimum of 10 vents, 6 adjustable
Air conditioning
Height and inclination adjustable steering column

One key operating fuel cap, doors and ignition. Minimum of 3 keys supplied per vehicle

Central Colour display with information on all relevant vehicle data and board computer, incl. on board diagnostics
Control of the sweeping systems via an ergonomic door control panel with joysticks
Cruise control function

Cab floor windows for optimum view on brushes and suction nozzle

Water System

Fresh water tank: 175l to 190l
Re-circulating water tank: 175l to 190l plus Re-circulating water up to 250l in hopper
Total Re-circulation water 350l to 440l
Total water capacity 500l to 630l
Re-circulating water discharge via in cab control
Water tank made of impact resistance polymer

water nozzles per brush- adjustable directly on the brushes

Brush System

Heavy duty pushed 2-brush-system
Brush diameter 800mm to 900mm
Hydraulic ground pressure adjustment
Brush speed individually adjustable 0 - 130 max rpm

Brush material either Plastic (Poly), mixed (steel-Poly) or steel

Suction

Hot galvanized steel suction box for enhanced corrosion protection and strength
Guided on swivelling castor wheels
Hydraulic activated debris flap
Hydraulic lifting including incremental lifting to nozzle box
Pulled nozzle box system to ensure increased damage protection

LED work light to illuminate the work area around the suction nozzle box

Hopper

Drilled Hopper Screen not wired
Aluminium corrosion resistant construction
1.9 to 2.1m³ gross volume
Suction tube in the hopper made of stainless steel
Dirt water separation screens made of stainless steel, mounted to front and side walls in the hopper
Hopper lid hydraulic operated, can be opened separately
Hopper functions can be controlled in cab or via external control pendant
Hydraulic tipping to the rear - 1.400mm to 1.550mm

Manually operated hopper raise feature in case of engine breakdown/ loss of power Hydraulic system

Load-Sensing hydraulic system
Hydraulic tank made of impact resistance polymer
Hydraulic filter blockage and hydraulic oil low level and hydraulic temp. warning system

Hydraulic steel pipes with factory fitted protected against corrosion

Brake System

Hydraulic servo assisted brake system on all 4 wheels
Dual circuit brake system (acting on front and rear axle)
Disc brakes on front and rear axle

Electro hydraulically operated parking brake with hill hold assist

Electric System

12 Volt battery with 90 to 100 Ah
Alternator 12V greater than 130A
Lighting according to EC regulations

Beacon foldable with protection bracket

Dimensions

Height with beacon 2.350mm max
Height without beacon 1.900 mm to 1.990 mm
Wheelbase up 1.810mm to 1.910mm
Length with brushes up to 4.600 mm

Width without brushes up to 1.315 mm

Steering / turning Circle

4-wheel steering switchable in cab

Turning cycle Kerb to Kerb up to 4.750 mm

Weights

Payload between 1.750kg and 2,100kg

Gross vehicle weight up to 5,000kg

Other items

Hopper painted in white with chapter 8 markings
DAB + Radio with USB connection and Bluetooth hands-free module
Reversing signal disengage able

Rear view and suction nozzle camera

Between 140 bar to 150 bar high pressure washer in frame with 8m to 10m hose recoil drum and 900m Hand Lance.

Additional Requirements

Rear mounted wonder hose

Near side weed control system incorporating reinforced brush arm, rated lift arm, heavy duty brush, Motor and weed ripping brush, independent brush lift control and brush head articulation controlled From cab

Training

Train the operator training for 2 operatives

The Council would be interested in receiving quotations to outright purchase the above vehicle.

For further details interested parties should contact either:

Wayne Lewkowicz

Environmental Services Supervisor (Streetscene)

07875 665502

wlewkowicz@chippenham.gov.uk

Will Tidmarsh

Head of Environmental Services

07875664690

Email: wtidmarsh@chippenham.gov.uk

Chippenham Town Council

Town Hall

High Street

Chippenham

Wiltshire

SN15 3ER

Tel: 01249: 446699

Email: enquiries@chippenham.gov.uk

Terms and Conditions:

i)	All prices tendered are to be net of VAT which are to be added by the successful tenderer at invoice stage.
ii)	A Chippenham Town Council Purchase Order will be issued to the successful tenderer as confirmation of the works.
iii)	The successful Tender will be paid in full in the 2026/27 financial year.
iv)	Reservation: The Town Council reserves the right to not accept the lowest, or any Tender.

Tenders must be provided on the attached form and returned either:

In an envelope addressed to - Chippenham Town Council CEO, Town Hall, High Street, Chippenham, Wiltshire, SN153ER, and Marked COMPACT SWEEPER SWINGO 200+ PUSHED 2-BRUSH SYSTEM or via email to procurement@chippenham.gov.uk.

Failure to do this will lead to disqualification from the quotation process.

TENDER FORMS MUST BE RETURNED BY: 09 March 2026.

documents

https://www.find-tender.service.gov.uk/Notice/011456-2026 , tenderNotice
https://www.find-tender.service.gov.uk/Notice/Attachment/A-11685 , biddingDocuments
https://www.find-tender.service.gov.uk/Notice/Attachment/A-11686 , biddingDocuments

Documents are linked, not mirrored. They are served by the publishing authority and may require registration.

notice history

1 notice published against this procurement.

Published	Type	Regime	Notice
9 Feb 2026	Tender notice (UK4)	Procurement Act 2023	011456-2026

similar contracts awarded

Other awarded contracts in the same category. Useful for seeing who normally wins this kind of work, and at what value.

GB-Scunthorpe: TPPL North Lincolnshire Council NEPO HGV Lot 5 - 1 x 3.5t Arbor Hoist (29623) · North Lincolnshire Council · £161,635
GB-Doncaster: TPPL City of Doncaster Council NEPO GM & P Lot 2 - 1 x Mini Excavator Complete with Twin Axle Trailer (New) (32958) · Doncaster Metropolitan Borough Council · £63,400
GB-Cheltenham: TPPL Ubico - Cotswold District Council - NEPO HGV Lot 2 - Up to 12 x 14t Diesel Kerbside Recycling Vehicles (30156) · Ubico Limited · £2,187,784
GB-Cheltenham: TPPL Ubico - Cotswold District Council - NEPO HGV Lot 2 - Up to 6 Kerbside Recycling Vehicles (30288) · Ubico Limited · £1,088,363
Purchase of 2x Car Derived Electric Panel Vans and 2x Car Derived Crew Van Electric Panel Vans · Darlington Borough Council · £80,140
Supply of Argo Conquests · MCA - Maritime and Coastguard Agency · £225,119
Supply of Can Am Traxter · MCA - Maritime and Coastguard Agency · £25,734
GB-Bilsthorpe: TPPL Via NEPO HGV Lot 1 - 1 x 18t Crane Lorry (32312) · Via East Midlands Limited · £164,164

source

Published on Find a Tender. Contact details for named individuals are not reproduced on this site.