1992 Tube Stock Grab Pole Refurbishment

This requirement is for the refurbishment of the passenger grab poles currently installed within the saloon of 1992 Tube Stock (92TS) operating on the Central and Waterloo & City lines of London Underground (LU).

The Waterloo & City Line will be an option at LU's discretion.

Grab pole refurbishment is required to address the poor state of finish on the existing grab poles. This includes areas where the current coating is worn, discoloured or missing.

A consistent coating finish and specific coating colour are required to comply with the Rail Vehicle Accessibility Regulations (RVAR).

Some grab poles are expected to have damage to the grub screw fixing arrangement and / or are expected to have suffered corrosion damage (the bottom end of the central floor mounted grab poles in particular). This will require repairing as part of the refurbishment.

Due to tolerances and the likelihood of small levels of distortion, the grab poles must be re-fitted in the same location that they were removed from. A method of assigning a unique identifier to each grab pole must therefore be developed.

The grab pole refurbishment work is part of a large programme of works referred to as CLIP. The CLIP programme of works for the Central Line trains takes place on an 8-car train at the Acton Works site, whilst on the Waterloo & City Line trains, the work takes place on a 4-car train at Waterloo Depot.

The refurbishment scope is expected to include, but is not limited to;

More details are included with the attached documentation.