1861/366/EML/CTI/17 High Resolution 3D Wax Printer

1861/366/EML/CTI/17 High Resolution 3D Wax Printer

The University of Sheffield wishes to invite tenders for a 3D Wax Printer on behalf of the Advanced Manufacturing Research Centre, Castings Group at Catcliffe, South Yorkshire.

Scope of Requirement

The requirement is for a 3D wax printer with build volume of a minimum of 6.75 litres. The build platform will need a minimum x-axis of 250mm, y-axis of 180mm and a z-axis of 150mm. Preference would be given to a printer with 2 options for resolution when building the parts, in terms of layer thickness. The maximum layer thickness acceptable is 32µm.

Tender Process and Documentation:

The ITT can be downloaded by registering and expressing your interest on the University`s e-tendering system https://in-tendhost.co.uk/Sheffield

If you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed at https://in-tendhost.co.uk/Sheffield

Completed tenders must be returned through the same e-tendering system.

Closing date for receipt of tenders: 11th of January 2018 at 12 noon (UK time).

Additional information: Documentation may be downloaded via the University's electronic tendering portal https://in-tendhost.co.uk/sheffield

Delivery Notes

Delivery to the Castings Group of the Advanced Manufacturing Research Centre, Catcliffe, Rotherham, South Yorkshire.

Is a Recurrent Procurement Type? : No