Toilets

The works include the full strip-out, refurbishment, and reinstallation of sanitary fittings, finishes, and associated building and plumbing works to the existing toilet area.

• 1.Strip Out and Preparation
• a.Strip out and remove existing toilet, sink, and associated fittings.
• b.Carry out full demolition/soft strip of redundant fixtures, finishes, and

pipework as required.

• c.Remove existing internal door and door furniture.
• d.Dispose of all waste materials in accordance with site waste management and environmental regulations.
• e.Make good all disturbed areas to a sound and even finish ready for decoration.
• 2.Windows
• a.Make good 2 no. existing windows, including repair of frames, cleaning, sealing, and preparation for decoration as required.
• 3.Decoration
• a.Prepare all wall, ceiling, and wood surfaces.
• b.Apply one mist coat and one full coat of quality trade emulsion to walls and ceilings.
• c.Apply suitable finish paint to all woodwork, trims, and window frames.
• 4.Joinery Works
• a.Refurbish existing door, including sanding, filling, repainting/staining, and fitting new door furniture (handle, lock, and signage).
• b.Install shelving to support new water heater - securely fixed, level, and able to support full load of the appliance.
• c.Construct and install heater cover (removable for access and maintenance), finished to match surrounding décor.
• d.Carry out any required boxing-in of pipework to provide a neat and accessible finish.
• 5.Plumbing Works
• a.Supply and install new close-coupled WC suite, including pan, cistern, seat, and all fixings.
• b.Supply and install new sink with thermostatic mixing tap.
• c.Supply and install new 15-litre electric water heater.
• d.Complete all associated pipework, waste, and lagging to meet current Building and Water Regulations.
• e.Pressure test system upon completion.
• 6.Mechanical Works
• a.Core hole through external wall for new extract fan installation (fan to be supplied separately or as specified).
• b.Seal all penetrations weather-tight and make good finishes.
• 7.Completion
• a.Ensure all works are clean, fully operational, and tested.
• b.Remove all rubbish and debris from site.
• c.Provide user instructions for all new equipment (heater, tap, etc.).
• d.Leave area ready for immediate use