UK SBS PS17055 RAL Engineering Design & Drawing

***PLEASE NOTE THE CLOSING DATE FOR THIS REQUIREMENT IS 13/04/2017 AT 14:00PM, PLEASE DO NOT APPLY DIRECT TO THE BUYER***

The Science and Technology Facilities Council (STFC) department of RAL Space is designing and building five blackbody targets for the calibration of two instruments on the European Space Agency (ESA) Meteosat Third Generation (MTG) imaging and sounding satellites. The two instruments are called 'IRS' (being developed by OHB in Germany) and 'FCI' (being developed by Thales-Alenia Space in France TAS-F). The blackbody targets (BB) require very accurate thermal control, based on a liquid nitrogen jacket, a helium gas gap (where heat conduction through the gas is controlled by adjusting its pressure), and electric heaters. These, together with associated electronics, controls, tooling, flanges, harnesses, and cryogenic supply systems and their ancillary pipework, form the Optical Ground System Equipment (OGSE).

RAL Space require a supplier to provide mechanical support to finalise the design, analysis and support the manufacture of the blackbody targets, as well as to provide support for the assembly/integration leading to the delivery of these blackbody targets..

The supplier will be responsible for:

Additional information: UK Shared Business Services eSourcing

As part of the strategic alliance between UK Shared Business Services Ltd (UK SBS) and Crown Commercial Service (CCS), UK SBS can use the CCS eSourcing Suite for future procurements. If you have not yet registered on the eSourcing Suite, this can be done online at https://gpsesourcing.cabinetoffice.gov.uk by following the link 'Register for CCS eSourcing'. Please note that, to register, you must have a valid DUNS number (as provided by Dun and Bradstreet) for the organisation which you are registering, who will be entering into a contract if invited to do so. Once you have registered on the eSourcing Suite, a registered user can express an interest for a specific procurement. This is done by emailing expressionofinterest@crowncommercial.gov.uk. Your email must clearly state: the name and reference for the procurement you wish to register for; the name of the registered Bidder; and the name and contact details for the registered individual sending the email. Crown Commercial Service will process the email and then enable the Bidder to access the procurement online via the e-Sourcing Suite. The registered user will receive a notification email to alert them once this has been done. The Sourcing documents can then be accessed on the eSourcing Suite at: https://gpsesourcing.cabinetoffice.gov.uk using the instructions detailed in the Specification documents within Contracts Finder. As a user of the e-Sourcing Suite you will have access to Emptoris email messaging service which facilitates all messages sent to you and from you in relation to any specific RFX event. Please note it is your responsibility to access these emails on a regular basis to ensure you have sight of all relevant information. For technical assistance on use of the e-Sourcing Suite please contact Crown Commercial Service Helpdesk : Telephone: 0345 010 3503 Training documents to support Bidders utilise Emptoris CCS eSourcing are available in the Contracts Finder Tender documents section