UKSBSRE150427 - North West England Shallow Borehole Project

The Natural Environment Research Council (NERC), through its centre/survey the British Geological Survey (BGS – known hereafter as “The Authority”), invites tenders for the provision of drilling services to support project monitoring and research activities. The purpose of the project is to improve the understanding of movement of fluids and possible chemical changes in aquifers and overlying strata.

It is planned that the work shall be carried out at six sites in total to the south of Pickering, around Kirby Misperton, North Yorkshire.

If the preferred sites are not accessible to The Authority, any alternative site shall be in the area of a radius of approximately 5 miles of the above.

At the sites, a pair of boreholes shall be required to provide:

It is planned to drill the pairs of boreholes from Ground Level (GL) to a Total Depth (TD) of approximately 40m and 20m adjacent to each other (within 5m, see Section 4 below and “Site Conditions”). On reaching TD the deeper boreholes may be geophysically logged, before being completed. Suitably specified permanent casing will be required in the upper section to prevent collapse and 100mm internal diameter plastic casing with a 2m slotted interval with suitably graded gravel packing in the lower part of the boreholes.

Geophysical logging and any water sampling will be done by The Authority, using their own equipment.

Additional information: I would like to notify you that this procurement opportunity is currently live on Tenders Electronic Daily, a copy of the Notice is attached and, if you have not already taken the opportunity to register, instructions are detailed below on the process for registration and expression of interest via Crown Commercial Service’s e-Sourcing Suite.

This procurement will be managed electronically via the Crown Commercial Service’s e-Sourcing Suite. To participate in this procurement, participants must first be registered on the e-Sourcing Suite.

If Bidders have not yet registered on the eSourcing Suite, this can be done online at https://gpsesourcing.cabinetoffice.gov.uk by following the link ‘Register for CCS eSourcing’.

Please note that, to register, Bidders must have a valid DUNS number (as provided by Dun and Bradstreet) for the organisation which you are registering, who will be entering into a contract if invited to do so.

Full instructions for registration and use of the system can be found at

http://ccs.cabinetoffice.gov.uk/i-am-supplier/respond-tender

Once you have registered on the eSourcing Suite, a registered user can express an interest for a specific procurement. This is done by emailing ExpressionOfInterest@ccs.gsi.gov.uk.

Your email must clearly state:

the name and reference for the procurement you wish to register for;

the name of the registered supplier;

the name and contact details for the registered individual sending the email.

Crown Commercial Service (CCS) will process the email and then enable the Bidder to access the procurement online via the e-Sourcing Suite.

The registered user will receive a notification email to alert them once this has been done.

As a user of the e-Sourcing Suite you will have access to Emptoris email messaging service which facilitates all messages sent to you and from you in relation to any specific RFX event.

Please note it is your responsibility to access these emails on a regular basis to ensure you have sight of all relevant information.

For technical assistance on use of the e-Sourcing Suite please contact Crown Commercial Service (CCS) Helpdesk : Freephone: 0345 010 3503

email: supplier@ccs.gsi.gov.uk

Training support to respond to a requirement is available to bidders at http://www.uksbs.co.uk/services/procure/Pages/supplier.aspx