Awarded RFQ - Micro-hardness Indentation Machine
key details
| Status | complete |
|---|---|
| Category (CPV) | 38000000 |
| Region | London |
| Deadline | 3 Nov 2021 |
| Contract start | 22 Nov 2021 |
| Contract end | 22 Nov 2022 |
| Procedure | limited |
| SME suitable | Yes |
| OCID | ocds-b5fd17-b2a63b48-5a3b-4cc2-a39c-e0c45a37a132 |
Award
| Supplier | Value | Date | Status |
|---|---|---|---|
| Hardness Calibrations | £32,221 | 22 Nov 2021 | active |
description
The National Physical Laboratory [NPL] requirement is for a piece of equipment to enable low-load and micro-hardness testing of materials. The purpose is to replace a previous piece of equipment that is at its end of life.
The equipment must be able to perform low-load and microhardness Vickers and Knoop hardness testing at loads ranging from 10 gf to 2 kgf (or 0.098 N to 20 N) in a traceable manner such as through calibration to approved standards (such as BS ISO 4516). The equipment must also be able to meet all minimum requirements as laid out in such standards and will ideally exceed them as is stated below. It would also be preferential for the equipment to have additional functionality in the form of being able to measure load/displacement curves during the indentation, and the ability to conduct tests at different load cycle timings.
notice history
1 notice published against this procurement.
| Published | Type | Regime | Notice |
|---|---|---|---|
| 29 Nov 2021 | Award (award) | · | 136ba8b7-87cc-4cf8-9cfe-1d5cbfa01055-489629 |
more from National Physical Laboratory
- Strategic Reporting · £500,000 · 16 Jun 2025
- RFQ_128032 - Bibliometric Assessment of the National Physical Laboratory's (NPL) Research Output · £40,750 · 18 Feb 2025
- Study on Better Evidencing Benefits Attributable to NPL's Work in Radiotherapy · £60,000 · 18 Feb 2025
- ITT_129557 - Evaluation of the National Timing Centre R&D Programme (2019-25) · £130,000 · 14 Feb 2025
- Cryogen Free JJ Volt System · £350,000 · 27 Jan 2025
- ITT_123111 - Cryogen Free Josephson Junction (JJ) Voltage System · £350,000 · 27 Jan 2025
- RFQ - BioCentrifuge and Rotors 129563 · 20 Jan 2025
- Laboratory building construction work (Building 47) for the National Physical Laboratory · £5,000,000 · 13 Dec 2024
all contracts from this buyer →
similar contracts awarded
Other awarded contracts in the same category. Useful for seeing who normally wins this kind of work, and at what value.
- The Provision of a MSC Class II Cabinet · Medicines and Healthcare Products Regulatory Agency · £17,718
- NCA31153 Incucyte SX5 (for IRR South) · University Of Edinburgh
- Cryogenic System · University of Bristol · £215,775
- Supply and Support of Automated Film Scanners · Historic Environment Scotland
- 4998/AM/GM - Digital Product Passport Cell R3 · UNIVERSITY OF SHEFFIELD · £400,000
- Procurement of Pilot Freeze Dryer · MHRA · £200,000
- Purchase of a Materials Tester · University Of Edinburgh
- Supply, delivery, installation, and commissioning of automated liquid handlers Tender · UK BIOBANK LIMITED · £3,200,000
source
Published on Contracts Finder. Contact details for named individuals are not reproduced on this site.