GB-High Wycombe: Supply and Installation of Grinding Benches

Quantity 2 Grinding Bench Assemblies. Each Assembly should be treated as one complete system and each System must have the following specifications:

• a.IP65 Rating and be able to operate from 415v three phase 50hz supply.
• b.A bench constructed in powder coated steel with a minimum working area of 1500mm in length, 650mm in width and 850mm high. The overall dimensions of the grinding bench shall be no more than 1800mm wide, 1000mm deep and working height 850mm high; overall height to be no more than 1800mm. Including rear and side protective screening.
• c.A downdraft extraction facility with dust collection to facilitate simple disposal of aggregated dust; suction to be minimum of 1750m³/h.
• d.A wet type filtration system with a collector for use when Aluminum grinding. The construction should be metal material with appropriate finishing. The collector should have anti-spark features, noise reduction, fluid level control, drain valve, sludge bin and be able to handle corrosion inhibitors.

Additional information: To view this notice, register as a supplier here:

http://www.contracts.mod.uk/delta/signup.html?userType=supplier

and search for the notice with reference 'GB-High Wycombe: Supply and Installation of Grinding Benches'.