GC/ MS_ (2) Replacing ITT818

Gas Chromatograph with Mass Spectrometer. Major requirements are listed below:

i- GC/MS systems can be able to take samples from to several gas sorption/separation systems via online. GC/MS configuration should be able to collect the sample via a sweep gas and carry it to the GC/MS instrument, when needed.

ii- Samples can be injected to the following systems and tested separately: (1) GC, (2) MS and (3) GC/MS.

iii- GC system should contain both Flame Ionisation and Thermal Conductivity Detectors.

iv- GC system should be able to work split/splitless configuration.

v- GC/MS system can be compatible with gas/liquid samples injections, analyse gas mixtures containing e.g. CO2, CH4, N2, H2, O2, air, S compounds, water vapour, up to C5 Hydrocarbons, analyse organic-organic and organic-water mixtures.

vi- Sensitivity of the MS should be x20 than the available ones to be able to measure very low concentrations.

EXPRESSIONS OF INTEREST CLOSE: 11 November 2016

To EXPRESS INTEREST:

Please first register on the eTendering system then Login and go to Tenders.

Find the project scroll down to View Details and then scroll down to the Express Interest` button at the foot on the right hand side.

NOTE: To make sure you receive our email notifications. to ensure our emails reach your inbox please add our email domain @in-tend.co.uk to your safe senders list and check your spam filter settings.

Additional information: TENDERERS MUST EXPRESS THEIR INTEREST THROUGH FIRST REGISTERING ON THE UNIVERSITY`S E-TENDERING SYSTEM https://in-tendhost.co.uk/universityofnottingham/

Non-compliant expressions of interest (EOI) will not be considered or acknowledged. The university reserves the right to cancel the tender process at any stage. The University does not accept any liability for any costs incurred in tendering.

EXPRESSIONS OF INTEREST CLOSE: 11 November 2016.

To EXPRESS INTEREST:

Please first register on the eTendering system then Login and go to Tenders.

Find the project scroll down to View Details and then scroll down to the Express Interest` button at the foot on the right hand side.

NOTE: To make sure you receive our email notifications. to ensure our emails reach your inbox please add our email domain @in-tend.co.uk to your safe senders list and check your spam filter settings..

Once you have registered, log-in and go to Current Tenders/view printable details, then expressed interest in the project.

Once you have registered, expressed interest in the project AND your EOI will be accepted and an email will automatically be sent notifying you (to the inserted publish email address at point of registration) that it has been accepted and a second email notifying you that the documents have been published to your site under `My Tenders`.

Internet Explorer (not Mozilla Firefox) should be used and pop ups must be allowed.

All correspondence relating to this project should only be made through the e-Tendering web site. Click on CREATE NEW CORRESPONDENCE once you have logged on to the Web site and follow the instructions. Select send message via web option rather than `by email` option as this is received by the host company not directly to UoN.

HELP?: Should you encounter any problems with using the Web site (including if you get locked out), contact the In-Tend Help Desk on 0844 272 8810 support@in-tend.co.uk

Is a Recurrent Procurement Type? : No https://in-tendhost.co.uk/universityofnottingham/aspx/