Design, Supply & Installation of Mechanical Calibration Laboratory

Text to be corrected in the original notice:

Place of text to be modified: II.1.4

Instead of: Short Description: The design, supply and installation of a modern, showcase standard, self-contained mechanical calibration laboratory to be installed within the current production area. The minimum criteria to be met are; the successful tenderer must hold BS OHSAS 18001 Occupational Health & Safety Management System Accreditation, ISOI 14001 Environmental Management System Accreditation and must have a written Health and Safety at Work policy. The installation must meet the requirements for ISO 17025 UKAS Accreditation, the installation must control temperature and humidity for both electrical and mechanical works areas to the limits specified in JSP 509. Tenderers must show how they will minimise downtime to allow the Authority to meet its contractual obligations and expectations. The installation must allow for any future expansion and must have the appearance of a modern high-tech laboratory with one full wall constructed mainly of glass. The project must be completed by 31/03/17

Read: Suppliers must read through this set of instructions and follow the process to respond to this opportunity.

The information and/or documents for this opportunity are available on http://www.contracts.mod.uk.

You must register on this site to respond, if you are already registered you will not need to register again, simply use your existing username and password. Please note there is a password reminder link on the homepage.

Suppliers must log in, go to your Response Manager and add the following Access Code: TMQ46XUY8D.

Please ensure you follow any instruction provided to you here.

The deadline for submitting your response(s) is detailed within this contract notice, you will also have visibility of the deadline date, once you have added the Access code via DCO as the opening and closing date is visible within the opportunity.

Please ensure that you allow yourself plenty of time when responding to this opportunity prior to the closing date and time, especially if you have been asked to upload documents.

If you experience any difficulties please refer to the online Frequently Asked Questions (FAQ’s) or the User Guides or contact the MOD DCO Helpdesk by emailing support@contracts.mod.uk or Telephone 0800 282 324

Short Description: The design, supply and installation of a modern, showcase standard, self-contained mechanical calibration laboratory to be installed within the current production area. The minimum criteria to be met are; the successful tenderer must hold BS OHSAS 18001 Occupational Health & Safety Management System Accreditation, ISOI 14001 Environmental Management System Accreditation and must have a written Health and Safety at Work policy. The installation must meet the requirements for ISO 17025 UKAS Accreditation, the installation must control temperature and humidity for both electrical and mechanical works areas to the limits specified in JSP

Additional information: To view this notice, register as a supplier here:

http://www.contracts.mod.uk/delta/signup.html?userType=supplier

and search for the notice with reference 'UK-Deeside: Building installation work.'.